Skip to content

0.17.0

Latest
Latest
Compare
Choose a tag to compare
@hathach hathach released this 13 Sep 16:44
· 277 commits to master since this release
0.17.0
5217cee
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.

0.17.0

General

  • Improved CI: build both cmake and make. Make use of CircleCI for part of build process to speed up CI
  • Add CodeQL Workflow for Code Security Analysis
  • Add Clang compiler support
  • Add default implementation for weak callbacks functions for better Keil compatibility
  • Upgrade hardware-in-the-loop (HIL) testing with more boards and examples: including dual stack example

Controller Driver (DCD & HCD)

  • Chipidea

    • Support MCXA

  • DWC2

    • Fix tickless issue with stm32f7: disable ULPI clock during sleep when using internal phy
    • Fix SOF interrupt handling
    • Fix fifo level half/empty issue
    • Add DWC2 Test Mode support.
    • for esp32 force disconnect/connect using USB_WRAP otg pad override

  • FSDEV

    • Rewrite and Generalize driver to support non-stm32 mcu such as wch

    • Simplify PMA, HW FIFO access and bit manipulation for different access scheme 1x16, 2x16 and 32 bit

    • Add support for ch32 usbd e.g ch32v203

    • Add support for STM32G4 and STM32U5 microcontrollers.

    • Fix h5 (32-bit) errata 2.15.1: Buffer description table update completes after CTR interrupt triggers

    • ISO EP buffer allocation improvements, implement dcd_edpt_close_all()

    • Fix ch32v203 race condition and stability issue with

      • fix ch32v203 seems to unconditionally accept ZLP on EP0 OUT.
      • fix v203 race condition between rx bufsize and RX_STAT which cause PMAOVR, occurs with WRITE10
      • correctly handle setup prepare at dcd_edpt0_status_complete(), which fixes the race condition with windows where we could miss setup packet (setup bit set, but count = 0)

  • MAX3421E

    • Add support for rp2040, esp32 (c3, c6, h2, etc..)
    • Add hcd_deinit() for max3421
    • Retry NAK handling next frame to reduce CPU and SPI bus usage
    • add cpuctl and pinctl to tuh_configure() option for max3421
    • Implement hcd abort transfer for Max3421
    • Properly Handle NAK Response in MAX3421E driver: correctly switch and skip writing to 2 FIFOs when NAK received. Otherwise, the driver may hang in certain conditions.

  • MSP430: support non-bus-powered

  • MUSB

    • Add support for Analoog devices: max32650, max32666, max32690, max3278002

  • nRF

    • Fix dcd_edpt_open for iso endpoint
    • Handle ISOOUT CRC errors
    • Add compile support with old nordic sdk
    • Fix a few race conditions

  • OHCI

    • Allow more than 16 devices

  • RP2040

    • Correctly abort control transfer when new setup arrived. Due to RP2040-E2 only able to fix B2 or later
    • Implement hcd abort transfer for rp2040
    • Add support for rp2350

  • RUSB2

    • Support ra2a1 pipe number scheme

  • WCH CH32

    • Added support for USB OTG/FS and FSDev Driver. Update CH32V307 to allow manual select FS or HS driver.
    • Fixed various bugs in CH32v307 usbhs driver: endpoint handling and data transfer management.

Device Stack

  • Add tud_deinit() and class driver deinit() to deinitialize TinyUSB device stack.

  • Add support for generic SOF callback.

  • Add set address recovery time 2ms per USB spec.

  • Audio

    • Add audio_test_freertos & audio_4_channel_mic_freertos
    • Improved support for Audio Class 2.0 (UAC2) with various bug fixes.
    • Add feedback by fifo counting.

  • Bluetooth HCI

    • Issue ZLP on ACL IN ep when transfer is multiple of endpoint max packet size

  • CDC

    • Add tud_cdc_configure_fifo() to make RX/TX buffer persistent (not clear when disconnected)
    • Add missing capability bit for CDC ACM serial break support
    • Enhanced CDC class with better handling of large data transmissions.
    • Add missing capability bit for CDC ACM serial break support

  • HID

    • Added missing key codes for keypad
    • Added HID Lighting and Illumination functionality
    • Fixed issues in the HID class for more reliable device enumeration.
    • Support HID Mouse with absolute positioning
    • Use separate buffer for control SET_REPORT, fix conflict with interrupt endpoint out

  • MSC: Added support for SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL

  • Net

    • Rewrite of NCM device driver to improve throughput
    • removed obsolete tud_network_link_state_cb()

  • USBTMC Added notification support

  • Vendor

    • Migrate to new endpoint stream API, support non-buffered TX/RX
    • Add ZLP for write() when needed

  • Video

    • Enhance UVC descriptors and example
    • Video Added support for USB Video Class (UVC) with MJPEG.
    • Fix multiple interfaces, add an example of 2ch video capture.
    • Fix race for tud_video_n_streaming check

Host Stack

  • Added tuh_deinit() to de-initialize TinyUSB host stack.

  • Added support for new USB mass storage class APIs.

  • Improved error handling and retry mechanisms for unstable devices.

  • CDC Serial

    • Add support for ch34x
    • Allow to overwrite CFG_TUH_CDC_FTDI/CP210X/CH32X_VID_PID_LIST
    • Enhanced stability of CDC-ACM devices during enumeration.

  • HID

    • Add tuh_hid_receive_abort()
    • Add tuh_hid_get_report()

  • Hub

    • Prevent status request to invalid ep_num
    • Fix double status xfer
    • unroll hub removal

What's Changed

New Contributors

Full Changelog: 0.16.0...0.17.0

Contributors

tannewt, shuffle2, and 69 other contributors
Assets 2
Loading