Getting Started

• Overview
• Build an operator using the Operator SDK
  • Create a new project
  • Manager
• Add a new Custom Resource Definition
  • Define the Memcached spec and status
• Add a new Controller
  • Resources watched by the Controller
  • Reconcile loop
• Build and run the operator
  • 1. Run as a Deployment inside the cluster
  • 2. Run locally outside the cluster
• Create a Memcached CR
  • Update the size
  • Cleanup
• Reference implementation
• Manage the operator using the Operator Lifecycle Manager
  • Generate an operator manifest
  • Testing locally
  • Promoting operator standards
• Conclusion

Overview

The Operator Framework (intro blog post) is an open source toolkit to manage Kubernetes native applications, called operators, in an effective, automated, and scalable way. Operators take advantage of Kubernetes's extensibility to deliver the automation advantages of cloud services like provisioning, scaling, and backup/restore while being able to run anywhere that Kubernetes can run.

This guide shows how to build a simple memcached operator and how to manage its lifecycle from install to update to a new version. For that, we will use two center pieces of the framework:

• Operator SDK: Allows your developers to build an operator based on your expertise without requiring knowledge of Kubernetes API complexities.
• Operator Lifecycle Manager: Helps you to install, update, and generally manage the lifecycle of all of the operators (and their associated services) running across your clusters.

Build an operator using the Operator SDK

BEFORE YOU BEGIN: links to the Operator SDK repo in this document are pinned to the master branch. Make sure you update the link such that it points to the correct Operator SDK repo version, which should match this repo's version or the operator-sdk version being used. For example, if you are using operator-sdk v0.12.0, update all links from this repo to the SDK repo with master -> v0.12.0. Otherwise you may see incorrect information.

The Operator SDK makes it easier to build Kubernetes native applications, a process that can require deep, application-specific operational knowledge. The SDK not only lowers that barrier, but it also helps reduce the amount of boilerplate code needed for many common management capabilities, such as metering or monitoring.

This section walks through an example of building a simple memcached operator using tools and libraries provided by the Operator SDK. This walkthrough is not exhaustive; for an in-depth explanation of these steps, see the SDK's user guide.

Requirements: Please make sure that the Operator SDK is installed on the development machine. Additionally, the Operator Lifecycle Manager must be installed in the cluster (1.8 or above to support the apps/v1beta2 API group) before running this guide.

Create a new project

1. Use the CLI to create a new memcached-operator project:

$ mkdir -p $GOPATH/src/github.com/example-inc/
$ cd $GOPATH/src/github.com/example-inc/
$ export GO111MODULE=on
$ operator-sdk new memcached-operator
$ cd memcached-operator

This creates the memcached-operator project.

2. Install dependencies by running go mod tidy

NOTE: Learn more about the project directory structure from the SDK project layout documentation.

Manager

The main program for the operator cmd/manager/main.go initializes and runs the Manager.

The Manager will automatically register the scheme for all custom resources defined under pkg/apis/... and run all controllers under pkg/controller/....

The Manager can restrict the namespace that all controllers will watch for resources:

mgr, err := manager.New(cfg, manager.Options{Namespace: namespace})

By default this will be the namespace that the operator is running in. To watch all namespaces leave the namespace option empty:

mgr, err := manager.New(cfg, manager.Options{Namespace: ""})

Add a new Custom Resource Definition

Add a new Custom Resource Definition (CRD) API called Memcached, with APIVersion cache.example.com/v1alpha1 and Kind Memcached.

$ operator-sdk add api --api-version=cache.example.com/v1alpha1 --kind=Memcached

This will scaffold the Memcached resource API under pkg/apis/cache/v1alpha1/....

Define the Memcached spec and status

Modify the spec and status of the Memcached Custom Resource (CR) at pkg/apis/cache/v1alpha1/memcached_types.go:

type MemcachedSpec struct {
    // Size is the size of the memcached deployment
    Size int32 `json:"size"`
}
type MemcachedStatus struct {
    // Nodes are the names of the memcached pods 
    // +listType=set  
    Nodes []string `json:"nodes"`
}

After modifying the *_types.go file always run the following command to update the generated code for that resource type:

$ operator-sdk generate k8s

Also run the following command in order to automatically generate the OpenAPI validations.

$ operator-sdk generate openapi

You can see the changes applied in deploy/crds/cache.example.com_memcacheds_crd.yaml

Add a new Controller

Add a new Controller to the project that will watch and reconcile the Memcached resource:

$ operator-sdk add controller --api-version=cache.example.com/v1alpha1 --kind=Memcached

This will scaffold a new Controller implementation under pkg/controller/memcached/....

For this example replace the generated Controller file pkg/controller/memcached/memcached_controller.go with the example memcached_controller.go implementation.

The example Controller executes the following reconciliation logic for each Memcached CR:

• Create a memcached Deployment if it doesn't exist
• Ensure that the Deployment size is the same as specified by the Memcached CR spec
• Update the Memcached CR status with the names of the memcached pods

The next two subsections explain how the Controller watches resources and how the reconcile loop is triggered. Skip to the Build section to see how to build and run the operator.

Resources watched by the Controller

Inspect the Controller implementation at pkg/controller/memcached/memcached_controller.go to see how the Controller watches resources.

The first watch is for the Memcached type as the primary resource. For each Add/Update/Delete event the reconcile loop will be sent a reconcile Request (a namespace/name key) for that Memcached object:

err := c.Watch(
    &source.Kind{Type: &cachev1alpha1.Memcached{}},
    &handler.EnqueueRequestForObject{},
  )

The next watch is for Deployments but the event handler will map each event to a reconcile Request for the owner of the Deployment. Which in this case is the Memcached object for which the Deployment was created. This allows the controller to watch Deployments as a secondary resource.

err := c.Watch(
    &source.Kind{Type: &appsv1.Deployment{}},
    &handler.EnqueueRequestForOwner{
        IsController: true,
        OwnerType:    &cachev1alpha1.Memcached{}},
    )

Reconcile loop

Every Controller has a Reconciler object with a Reconcile() method that implements the reconcile loop. The reconcile loop is passed the Request argument which is a Namespace/Name key used to lookup the primary resource object, Memcached, from the cache:

func (r *ReconcileMemcached) Reconcile(request reconcile.Request) (reconcile.Result, error) {
    // Lookup the Memcached instance for this reconcile request
    memcached := &cachev1alpha1.Memcached{}
    err := r.client.Get(context.TODO(), request.NamespacedName, memcached)
    ...
}  

For a guide on Reconcilers, Clients, and interacting with resource Events, see the Client API doc.

Build and run the operator

Before running the operator, the CRD must be registered with the Kubernetes apiserver:

$ kubectl create -f deploy/crds/cache.example.com_memcacheds_crd.yaml

Once this is done, there are two ways to run the operator:

• As a Deployment inside a Kubernetes cluster
• As Go program outside a cluster

1. Run as a Deployment inside the cluster

Build the memcached-operator image and push it to your registry. The following example uses https://quay.io as the registry.

$ operator-sdk build quay.io/<user>/memcached-operator:v0.0.1
$ sed -i 's|REPLACE_IMAGE|quay.io/<user>/memcached-operator:v0.0.1|g' deploy/operator.yaml
$ docker push quay.io/<user>/memcached-operator:v0.0.1

Note If you are performing these steps on OSX, use the following sed command instead:

$ sed -i "" 's|REPLACE_IMAGE|quay.io/<user>/memcached-operator:v0.0.1|g' deploy/operator.yaml

The above command will replace the string REPLACE_IMAGE with the <image>:<tag> built above. Afterwards, verify that your operator.yaml file was updated successfully.

serviceAccountName: memcached-operator
containers:
- name: memcached-operator
  # Replace this with the built image name
  image: quay.io/<user>/memcached-operator:v0.0.1
  command:
  - memcached-operator
  imagePullPolicy: Always

IMPORTANT: Ensure that your cluster is able to pull the image pushed to your registry.

The Deployment manifest is generated at deploy/operator.yaml. Be sure to update the deployment image as shown above since the default is just a placeholder.

Setup RBAC and deploy the memcached-operator:

$ kubectl create -f deploy/service_account.yaml
$ kubectl create -f deploy/role.yaml
$ kubectl create -f deploy/role_binding.yaml
$ kubectl create -f deploy/operator.yaml

NOTE: To apply the RBAC you need to be logged in system:admin. (E.g. By using for OCP: oc login -u system:admin.)

Verify that the memcached-operator Deployment is up and running:

$ kubectl get deployment
NAME                     DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
memcached-operator       1         1         1            1           1m

Verify that the memcached-operator pod is up and running:

$ kubectl get pod
NAME                                  READY     STATUS    RESTARTS   AGE
memcached-operator-7d76948766-nrcp7   1/1       Running   0          44s

IMPORTANT: Ensure that you built and pushed the image, and updated the operator.yaml file.

Verify that the operator is running successfully by checking its logs.

$ kubectl logs memcached-operator-7d76948766-nrcp7
{"level":"info","ts":1567613603.7161574,"logger":"cmd","msg":"Go Version: go1.12.7"}
{"level":"info","ts":1567613603.7163043,"logger":"cmd","msg":"Go OS/Arch: linux/amd64"}
{"level":"info","ts":1567613603.7163143,"logger":"cmd","msg":"Version of operator-sdk: v0.12.0+git"}
{"level":"info","ts":1567613603.7166178,"logger":"leader","msg":"Trying to become the leader."}
{"level":"info","ts":1567613603.8369129,"logger":"leader","msg":"No pre-existing lock was found."}
{"level":"info","ts":1567613603.8667152,"logger":"leader","msg":"Became the leader."}
{"level":"info","ts":1567613603.9393756,"logger":"cmd","msg":"Registering Components."}
{"level":"info","ts":1567613603.9396026,"logger":"kubebuilder.controller","msg":"Starting EventSource","controller":"memcached-controller","source":"kind source: /, Kind="}
{"level":"info","ts":1567613603.9398162,"logger":"kubebuilder.controller","msg":"Starting EventSource","controller":"memcached-controller","source":"kind source: /, Kind="}
{"level":"info","ts":1567613604.0514739,"logger":"metrics","msg":"Metrics Service object created","Service.Name":"memcached-operator-metrics","Service.Namespace":"myproject"}
{"level":"info","ts":1567613604.0976534,"logger":"cmd","msg":"Could not create ServiceMonitor object","error":"no ServiceMonitor registered with the API"}
{"level":"info","ts":1567613604.0986068,"logger":"cmd","msg":"Install prometheus-operator in your cluster to create ServiceMonitor objects","error":"no ServiceMonitor registered with the API"}
{"level":"info","ts":1567613604.0988326,"logger":"cmd","msg":"Starting the Cmd."}
{"level":"info","ts":1567613604.2993534,"logger":"kubebuilder.controller","msg":"Starting Controller","controller":"memcached-controller"}
{"level":"info","ts":1567613604.3995395,"logger":"kubebuilder.controller","msg":"Starting workers","controller":"memcached-controller","worker count":1}

The following error will occur if your cluster was unable to pull the image:

$ kubectl get pod
NAME                                  READY     STATUS             RESTARTS   AGE
memcached-operator-6b5dc697fb-t62cv   0/1       ImagePullBackOff   0          2m

Following the logs in the error scenario described above.

$ kubectl logs memcached-operator-6b5dc697fb-t62cv
Error from server (BadRequest): container "memcached-operator" in pod "memcached-operator-6b5dc697fb-t62cv" is waiting to start: image can't be pulled

NOTE: Just for tests purposes make the image public and setting up the cluster to allow use insecure registry. ( E.g --insecure-registry 172.30.0.0/16 )

2. Run locally outside the cluster

This method is preferred during development cycle to deploy and test faster.

Set the name of the operator in an environment variable:

export OPERATOR_NAME=memcached-operator

Run the operator locally with the default kubernetes config file present at $HOME/.kube/config:

$ operator-sdk up local --namespace=default
2018/09/30 23:10:11 Go Version: go1.10.2
2018/09/30 23:10:11 Go OS/Arch: darwin/amd64
2018/09/30 23:10:11 operator-sdk Version: 0.0.6+git
2018/09/30 23:10:12 Registering Components.
2018/09/30 23:10:12 Starting the Cmd.

You can use a specific kubeconfig via the flag --kubeconfig=<path/to/kubeconfig>.

Create a Memcached CR

Create the example Memcached CR that was generated at deploy/crds/cache.example.com_v1alpha1_memcached_cr.yaml:

$ cat deploy/crds/cache.example.com_v1alpha1_memcached_cr.yaml
apiVersion: "cache.example.com/v1alpha1"
kind: "Memcached"
metadata:
  name: "example-memcached"
spec:
  size: 3

$ kubectl apply -f deploy/crds/cache.example.com_v1alpha1_memcached_cr.yaml

Ensure that the memcached-operator creates the deployment for the CR:

$ kubectl get deployment
NAME                     DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
memcached-operator       1         1         1            1           2m
example-memcached        3         3         3            3           1m

Check the pods and CR status to confirm the status is updated with the memcached pod names:

$ kubectl get pods
NAME                                  READY     STATUS    RESTARTS   AGE
example-memcached-6fd7c98d8-7dqdr     1/1       Running   0          1m
example-memcached-6fd7c98d8-g5k7v     1/1       Running   0          1m
example-memcached-6fd7c98d8-m7vn7     1/1       Running   0          1m
memcached-operator-7cc7cfdf86-vvjqk   1/1       Running   0          2m

$ kubectl get memcached/example-memcached -o yaml
apiVersion: cache.example.com/v1alpha1
kind: Memcached
metadata:
  clusterName: ""
  creationTimestamp: 2018-03-31T22:51:08Z
  generation: 0
  name: example-memcached
  namespace: default
  resourceVersion: "245453"
  selfLink: /apis/cache.example.com/v1alpha1/namespaces/default/memcacheds/example-memcached
  uid: 0026cc97-3536-11e8-bd83-0800274106a1
spec:
  size: 3
status:
  nodes:
  - example-memcached-6fd7c98d8-7dqdr
  - example-memcached-6fd7c98d8-g5k7v
  - example-memcached-6fd7c98d8-m7vn7

Update the size

Change the spec.size field in the memcached CR from 3 to 4 and apply the change:

$ cat deploy/crds/cache.example.com_v1alpha1_memcached_cr.yaml
apiVersion: "cache.example.com/v1alpha1"
kind: "Memcached"
metadata:
  name: "example-memcached"
spec:
  size: 4

$ kubectl apply -f deploy/crds/cache.example.com_v1alpha1_memcached_cr.yaml

Confirm that the operator changes the deployment size:

$ kubectl get deployment
NAME                 DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
example-memcached    4         4         4            4           5m

Cleanup

Delete the operator and its related resources:

$ kubectl delete -f deploy/crds/cache.example.com_v1alpha1_memcached_cr.yaml
$ kubectl delete -f deploy/crds/cache.example.com_memcacheds_crd.yaml
$ kubectl delete -f deploy/operator.yaml
$ kubectl delete -f deploy/role_binding.yaml
$ kubectl delete -f deploy/role.yaml
$ kubectl delete -f deploy/service_account.yaml

Reference implementation

The above walkthrough follows a similar implementation process to the one used to produce the memcached-operator in the SDK samples repo.

Manage the operator using the Operator Lifecycle Manager

NOTE: This section of the Getting Started Guide is out-of-date. We're working on some improvements to Operator SDK to streamline the experience of using OLM. For further information see, for example, this enhancement proposal. In the meantime, you might find the following documentation helpful:

The previous section has covered manually running an operator. In the next sections, we will explore using the Operator Lifecycle Manager (OLM) which is what enables a more robust deployment model for operators being run in production environments.

OLM helps you to install, update, and generally manage the lifecycle of all of the operators (and their associated services) on a Kubernetes cluster. It runs as an Kubernetes extension and lets you use kubectl for all the lifecycle management functions without any additional tools.

NOTE: Various public, OLM-ready operator projects are available at operatorhub.io.

Generate an operator manifest

The first step to leveraging OLM is to create a Cluster Service Version (CSV) manifest. An operator manifest describes how to display, create and manage the application, in this case memcached, as a whole. It is required for OLM to function.

The Operator SDK CLI can generate CSV manifests via the following command:

$ operator-sdk olm-catalog gen-csv --csv-version 0.0.1 --update-crds

Several fields must be updated after generating the CSV. See the CSV generation doc for a list of required fields, and the memcached-operator CSV for an example of a complete CSV.

NOTE: You are able to preview and validate your CSV manifest syntax in the operatorhub.io CSV Preview tool.

Testing locally

The next step is to ensure your project deploys correctly with OLM and runs as expected. Follow this testing guide to deploy and test your operator.

NOTE: Also, check out operatorhub.io's bundle build tool as an alternative to using operator-sdk olm-catalog gen-csv.

Promoting operator standards

We recommend running operator-sdk scorecard against your operator to see whether your operator's OLM integration follows best practices. For further information on running the scorecard and results, see the scorecard documentation.

NOTE: the scorecard is undergoing changes to give informative and helpful feedback. The original scorecard functionality will still be available while and after changes are made.

Conclusion

Hopefully, this guide was an effective demonstration of the value of the Operator Framework for building and managing operators. There is much more that we left out in the interest of brevity. The Operator Framework and its components are open source, so please feel encouraged to jump into each individually and learn what else you can do. If you want to discuss your experience, have questions, or want to get involved, join the Operator Framework mailing list.