WSL2: Do not recieve UDP packets from network interface using mirrored option

[mgkbeer]

Windows Version

10.0.22621.3007

WSL Version

2.1.0.0

Are you using WSL 1 or WSL 2?

• WSL 2
• WSL 1

Kernel Version

5.15.137.3-1

Distro Version

Ubuntu 22.04

Other Software

No response

Repro Steps

.wslconfig
[wsl2]
networkingMode=mirrored
[experimental] firewall=true

I run iperf client on WSL2 Ubuntu against server running on another device connected thru eth0
iperf -u -c 169.254.1.10
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000
inet 169.254.1.100 netmask 255.255.255.0 broadcast 169.254.1.255
inet6 fe80::ae4c:1e49:3c20:1ded prefixlen 64 scopeid 0x20
ether 00:e0:4c:68:00:17 txqueuelen 1000 (Ethernet)
RX packets 4 bytes 380 (380.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 23 bytes 3628 (3.6 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
and it works, however, when I run client on that external device I do not see any packets coming to WSL
I also tried adding new rules to firewall allowing specific port to be allowed, disabling firewalls (mcafee and windows) but for no avail

Expected Behavior

Expected behavior is that I get all the UDP packets on WSL2 that sent on that interface

Actual Behavior

I do not see any UDP packets when external device sending those to port 5001 and address 169.254.1.100

Diagnostic Logs

WslNetworkingLogs-2024-01-15_12-25-16.zip

[github-actions]

Hi I'm an AI powered bot that finds similar issues based off the issue title.

Please view the issues below to see if they solve your problem, and if the issue describes your problem please consider closing this one and thumbs upping the other issue to help us prioritize it. Thank you!

Open similar issues:

• Question on UDP multicast in mirrored mode and Wireshark (#10735), similarity score: 0.72
• Properly mirror all packets (including kernel sockets) for mirrored network mode (#10842), similarity score: 0.70

Note: You can give me feedback by thumbs upping or thumbs downing this comment.

[ghost]

This looks similar to #11034, are you using the experimental hostAddressLoopback config option?

[mgkbeer]

This looks similar to #11034, are you using the experimental hostAddressLoopback config option?
No, I did not use hostAddressLoopback option
.wslconfig
[wsl2]
networkingMode=mirrored
[experimental] firewall=true

[ghost]

By default mirrored mirrors binds that would capture 127.0.0.1 unless using that experimental config option. If you use that option and it still doesn't work then chime in on bug #11034

[mgkbeer]

I tried adding that option but it did not change anything, I still do not receive any packets on eth0 169.254.1.100
Did you have a chance to look at attached logs? I frankly do not believe those two issues are related
[wsl2]
networkingMode = mirrored
firewall=true
localhostforwarding = true
[experimental]
hostAddressLoopback = true
Interesting thing I want to mention is that it works from time to time, but when it works Jumbo frames do not work - only frames up to 1500. Is there a need to set MTU for a switch?